User Manual of Thermal Network Speed dome
Auto DPC Correction
Steps:
1. Select Auto from the modes.
2. Click
to start correction.
Manual DPC Correction
Steps:
1.
Select Manual from the modes.
2.
Point to the defective pixel, and click
3.
Click
to start correction.
4.
(Optional) Click
This function varies depending on the models of speed dome.
7.4.6 Picture in Picture
Before you start:
Enter Configuration > System > System Maintenance > VCA Resource Type to select
Picture in Picture as VCA Resource Type.
Purpose:
The system plays the live view of thermal channel and optical channel at the same time.
Steps:
1. Select the channel No. from the list.
© Hikvision
www.a1securitycameras.com email: sales@a1securitycameras.com
Figure 7-56 Defective Pixel Correction
to adjust the position.
to cancel the correction.
Available from A1 Security Cameras
117