Table of Contents
Advertisement
User Manual of Thermal Network Speed dome
3.
Check the Enable IEEE 802.1X checkbox to enable it.
4.
Configure the 802.1X settings, including user name and password.
The EAP-MD5 version must be identical with that of the router or the switch.
5.
Click
The camera reboots when you save the settings.
6.
After the configuration, connect the camera to the protected network.
7.2 Configuring Video and Audio Settings
7.2.1 Configuring Video Settings
Steps:
1. Enter the Video settings interface:
Configuration > Video/Audio > Video
2. Select the Channel No. in the dropdown list you want to configure.
© Hikvision
www.a1securitycameras.com email: sales@a1securitycameras.com
Figure 7-21 802.1X Settings
to finish the settings.
Figure 7-22 Configure Video Settings
Available from A1 Security Cameras
90
Advertisement
Table of Contents
