Table of Contents
Advertisement
User Manual of Thermal Network Speed dome
7.4 Configuring Image Settings
On the event configuration page, click
hide it.
Click the direction buttons to control the pan/tilt movements.
Click the zoom/iris/focus buttons to realize lens control.
The functions vary depending on the models of speed dome.
7.4.1 Configuring Display Settings
Purpose:
You can set the image quality of the speed dome, including brightness, contrast,
saturation, sharpness, etc.
The parameters in Display Settings interface vary depending on the models of speed
dome.
You can double click the live view to enter full screen mode and double click it again
to exit.
Steps:
1. Enter the Display settings interface:
Configuration > Image> Display Settings
2. Select the channel No. from the dropdown list.
3. You can select the Scene in the dropdown list with different predefined image
© Hikvision
www.a1securitycameras.com email: sales@a1securitycameras.com
to show the PTZ control panel or click
Figure 7-39 Display Settings
Available from A1 Security Cameras
105
to
Advertisement
Table of Contents
