Table of Contents
Advertisement
User Manual of Thermal Bi-spectrum Network Speed dome
Chapter 3Access to the Network
3.1 Accessing by Web Browsers
Steps:
1. Open the web browser.
2. In the address field, input the IP address of the network speed dome, e.g., 192.168.1.64
and press the Enter key to enter the login interface.
3. Activate the speed dome for the first time using, refer to the section 2.1.2 Activating
the Speed dome.
4. Select English as the interface language on the top-right of login interface.
5. Input the user name and password and click
The admin user should configure the device accounts and user/operator permissions
properly. Delete the unnecessary accounts and user/operator permissions.
The device IP address gets locked if the admin user performs 7 failed password
attempts (5 attempts for the user/operator).
6. Install the plug-in before viewing the live video and operating the speed dome. Please
follow the installation prompts to install the plug-in.
You may have to close the web browser to install the plug-in. Please reopen the web
browser and log in again after installing the plug-in.
© Hikvision
www.a1securitycameras.com email: sales@a1securitycameras.com
Speed dome
Figure 3-1 Login Interface
Available from A1 Security Cameras
14
.
Advertisement
Table of Contents
