Configuring Video Tampering Alarm - HIKVISION DS-2TD4166 User Manual

User Manual of Thermal Network Speed dome
You need a FTP server and set FTP parameters first. Refer to Section Configuring
FTP Settings for setting FTP parameters.
 Trigger Alarm Output
Trigger one or more external alarm outputs when an event occurs.
To trigger an alarm output when an event occurs, please refer to Section 5.2.4
Configuring Alarm Output to set the alarm output parameters.
 Trigger Recording
Record a video when an event occurs.
You have to set the recording schedule to realize this function. Please refer to
Section 5.1.1 Configuring Recording Schedule for settings the recording
schedule.

5.2.2 Configuring Video Tampering Alarm

Purpose:
You can configure the speed dome to trigger the alarm actions when the lens is covered.
Steps:
1. Enter the Video Tampering settings interface
Configuration > Event > Basic Event > Video Tampering
2. Select the channel to set the video tampering alarm.
© Hikvision
www.a1securitycameras.com email: sales@a1securitycameras.com
:
Available from A1 Security Cameras
46