Table of Contents
Advertisement
User Manual of Thermal Network Speed dome
5.
Click the dropdown menu in the rule list to select the crossing direction.
6.
Enable rules: Check the Enable checkbox of each rule in the rule list to enable the rule.
7.
Click
6.4.2 Intrusion
Purpose:
This function can be used for detecting whether there are people, vehicles and objects
intrude into the pre-defined region longer than the set duration. The alarm will be triggered
if the rule is broken.
Steps:
1.
Create new rule: Click on the button
2.
Select rule type: Click the dropdown menu and select Intrusion as the rule type.
3.
Configure the filtering size: for details, see step 3 in section 6.4.1 Line Crossing.
4.
Configure the rule area:
Click
on the tool bar of the live view panel. Click the mouse on the live view
image to specify a corner of the area. After you specify all the corners, right click the
mouse to connect the first corner and the last corner, which means the polygonal
area is drawn.
© Hikvision
www.a1securitycameras.com email: sales@a1securitycameras.com
Figure 6-10 Draw Line
to save the settings.
to add a new rule.
Available from A1 Security Cameras
73
Advertisement
Table of Contents
