Table of Contents
Advertisement
User Manual of Thermal Network Speed dome
The time of each period cannot be overlapped. Up to 8 periods can be configured for
each day.
6.
Set the Alarm Actions for Motion Detection.
Click
You can specify the linkage method when an event occurs. The following contents are
about how to configure the different types of linkage method.
Check the checkbox to select the linkage method. Notify Surveillance Center,
Send Email, Upload to FTP/Memory/NAS, Trigger Alarm Output and Trigger
Recording are selectable.
Notify Surveillance Center
Send an exception or alarm signal to remote management software when an
event occurs.
Send Email
Send an email with alarm information to a user or users when an event occurs.
To send the Email when an event occurs, you need to refer to Section Configuring
Email Settings to set the Email parameters.
Upload to FTP/Memory/NAS
Capture the image when an alarm is triggered and upload the picture to a FTP
server.
© Hikvision
www.a1securitycameras.com email: sales@a1securitycameras.com
tab to enter the Linkage Method interface.
Figure 5-14 Linkage Method
Available from A1 Security Cameras
45
Advertisement
Table of Contents
