Table of Contents
Advertisement
User Manual of Thermal Network Speed dome
2. Click the PTZ control buttons to find a position as the initial position of the speed
dome; you can also call a defined preset and set it as the initial position of the speed
dome.
3. Click Set to save the position.
Call/delete an Initial Position:
You can click
to call the initial position. You can click
and restore the factory default initial position.
7.3.4 Configuring Park Actions
Purpose:
This feature allows the speed dome to start a predefined park action (scan, preset, pattern
and etc.) automatically after a period of inactivity (park time).
Scheduled Tasks function is prior to Park Action function. When these two functions
are set at the same time, only the Scheduled Tasks function takes effect.
varies depending on
Pattern function
Steps:
1. Enter the Park Action settings interface:
Configuration > PTZ > Park Action
2. Check the checkbox of Enable Park Action.
3. Set the Park Time as the inactivity time of the speed dome before it starts the park
actions.
4. Choose Action Type the from the dropdown list.
5. Select the Action Type ID from the dropdown list.
6. Click
© Hikvision
www.a1securitycameras.com email: sales@a1securitycameras.com
Figure 7-28 PTZ Configuration
speed dome
Figure 7-29 Set the Park Action
Figure 7-30 Action Types
to save the settings.
Available from A1 Security Cameras
98
to delete the initial position
models.
Advertisement
Table of Contents
