Table of Contents
Advertisement
User Manual of Thermal Network Speed dome
3. There will be the certificate information after you successfully create and install the
certificate.
The default port number of HTTPS is 443. The port value ranges from 1 to 65535.
When the port number is the default number 443, the format of the URL is https://IP
address, eg., https://192.168.1.64.
When the port number is not the default number 443, the format of the URL is
https://IP address:port number, eg., https://192.168.1.64:81.
Configuring QoS Settings
Purpose:
QoS (Quality of Service) can help solve the network delay and network congestion by
configuring the priority of data sending.
Steps:
1. Enter the QoS settings interface:
Configuration >Advanced Configuration > Network > QoS
2. Configure the QoS settings, including video / audio DSCP, event / alarm DSCP and
Management DSCP.
The valid DSCP value ranges from 0 to 63. The DSCP value is bigger, the priority is
higher.
3. Click
Make sure that you enable the QoS function of your network device (such as a router).
It will ask for a reboot for the settings to take effect.
© Hikvision
www.a1securitycameras.com email: sales@a1securitycameras.com
Figure 7-18 Installed Certificate Property
Figure 7-19 QoS Settings
to save the settings.
Available from A1 Security Cameras
88
Advertisement
Table of Contents
