Table of Contents
Advertisement
User Manual of Thermal Network Speed dome
Pre-record: The time you set to start recording before the scheduled time or the
event. For example, if an alarm triggers recording at 10:00, and the pre-record time
is set as 5 seconds, the speed dome starts to record at 9:59:55.
The Pre-record time can be configured as No Pre-record, 5 s, 10 s, 15 s, 20 s, 25 s,
30 s or not limited.
The pre-record time changes according to the video bitrate.
Post-record: The time you set to stop recording after the scheduled time or the
event. For example, if an alarm triggered recording ends at 11:00, and the
post-record time is set as 5 seconds, the speed dome records until 11:00:05.
The Post-record time can be configured as 5 s, 10 s, 30 s, 1 min, 2 min, 5 min or
10 min.
Stream Type: You can select the stream type for recording; Main Stream, Sub
Stream and Third Stream are selectable. If you select the sub stream, you can
record for a longer time with the same storage capacity.
The Pre-record and Post-record parameters vary depending on the models of
speed dome.
4. Click OK to save the advanced setting.
5. Select a Record Type. The record type can be Continuous, Motion, Alarm, Motion |
Alarm, Motion & Alarm, and Event.
Normal: If you select Continuous, the video will be recorded automatically
according to the time of the schedule.
Record Triggered by Motion Detection: If you select Motion, the video will be
recorded when the motion is detected. Besides configuring the recording schedule,
you have to set the motion detection area and check the checkbox of Trigger
Channel in the Linkage Method of Motion Detection settings interface. For detailed
information, please refer to Section Motion Detection.
Record Triggered by Alarm: If you select Alarm, the video will be recorded when
the alarm is triggered via the external alarm input channels. Besides configuring
the recording schedule, you have to set the Alarm Type and check the checkbox of
© Hikvision
www.a1securitycameras.com email: sales@a1securitycameras.com
Figure 5-2 Record Parameters
Available from A1 Security Cameras
36
Advertisement
Table of Contents
