Table of Contents
Advertisement
User Manual of Thermal Network Speed dome
Importing/Exporting Configuration File
Steps:
1. Enter the Maintenance interface:
Configuration > System > Maintenance > Upgrade & Maintenance:
2. Click
to select the local configuration file and then click
start importing configuration file.
You need to reboot the speed dome after importing configuration file.
Upgrading the System
Steps:
1. Enter the Maintenance interface:
Configuration >System > Maintenance > Upgrade & Maintenance
2. Select Firmware or Firmware Directory.
Firmware: when you select Firmware, you need to find the firmware in your
computer to upgrade the device.
Firmware Directory: You need to find the directory where the firmware locates.
The device can find the firmware in the directory automatically.
3. Click
to select the local upgrade file and then click
remote upgrade.
The upgrading process will take 1 to 10 minutes. Please don't disconnect power of the
speed dome during the process. The speed dome reboots automatically after
upgrading.
Log Searching
Purpose:
© Hikvision
www.a1securitycameras.com email: sales@a1securitycameras.com
Figure 7-65 Restore Default Settings
Figure 7-66 Import Configuration File
Figure 7-67 Remote Upgrade
Available from A1 Security Cameras
123
to
to start
Advertisement
Table of Contents
