Table of Contents
Advertisement
User Manual of Thermal Network Speed dome
The operation, alarm, exception and information of the speed dome can be stored in log
files. You can also export the log files on your demand.
Before you start:
Please configure network storage for the speed dome or insert a memory card in the
speed dome.
Steps:
1. Enter the Log interface:
Configuration >System > Maintenance > Log
2. Set the log search conditions to specify the search, including the Major Type, Minor
Type, Start Time and End Time as shown in Figure 7-68.
3. Click
to search log files. The matched log files will be displayed on the Log
interface.
4. To export the log files, click Save Log to save the log files in your computer.
System Service
Steps:
1. Enter the interface of configuring the remote connection:
Configuration > System > Maintenance > System Service
2. Check the checkbox of Enable Supplement Light on your demand.
3. Check the checkbox of Enable Automatic De-icing on your demand.
The de-icing heater is only supported under POE+, 24VAC, or 12VDC power supply.
4. Select the power saving mode between manual and scheduled.
Power Saving Mode: Select power saving mode as manual, and you can turn on
© Hikvision
www.a1securitycameras.com email: sales@a1securitycameras.com
Figure 7-68 Log Searching Interface
Available from A1 Security Cameras
124
Advertisement
Table of Contents
