Table of Contents
Advertisement
User Manual of Thermal Network Speed dome
Create a Scene:
1)
Add New Scene: Click
2)
Control the PTZ to get the required scene.
3)
Set the scene parameters:
Scene Name: Enter a custom scene name.
Patrol Sequence: Set the sequence for the scene when doing patrol tracking. If
the sequence is selected as 0, this scene will not be configured for patrol tracking.
Duration: Set the dwell time of the scene when doing patrol tracking. The
intelligent analysis will be enabled during the period. If the alarm is triggered, the
speed dome will start to track automatically.
Enable Track: Check the checkbox to enable the tracking function for the scene.
Tracking Duration: Set the duration of the tracking. If the value is selected as 0,
the tracking duration will not be limited.
Limited Tracking: You can check the checkbox to enable/disable the function. If
the function is enabled, you can set the limited position for the tracking.
4)
Click
Rule Configuration:
At most 8 rules can be configured for a single scene. Follow the steps below to
configure the rule for the scene.
1)
Click the Rule tab to enter the rule settings interface.
2)
Create new rule: Click on the button
3)
Select rule type: Click the dropdown menu to select the rule type. Line Crossing,
Intrusion, Region Entrance, and Region Exiting are selectable.
4)
Configure the rule area: Click the Draw Line or Draw Area button on the tool bar of
the live view panel. Click the mouse on the live view panel. Right click the mouse
to finish drawing. For details, see 6.4 Rule Configuration Demonstration.
5)
Configure the filtering size: The filtering function is supported for all rules. You can
set the minimum and maximum size of the object needs to be filtered. The
system will only detect the object in a size between the configured minimum and
maximum value. For details, see6.4 Rule Configuration Demonstration.
6)
Enable rules: Check the Enable checkbox of each rule in the rule list to enable the
rule.
© Hikvision
www.a1securitycameras.com email: sales@a1securitycameras.com
to create a new scene.
to save the settings.
to add a new rule.
Figure 6-5 Rule List
Available from A1 Security Cameras
69
Advertisement
Table of Contents
