Table of Contents
Advertisement
User Manual of Thermal Network Speed dome
50
5.2.5 Handling Exception
The exception type can be HDD full, HDD error, network disconnected, IP address
conflicted and illegal login to the speed domes.
Steps:
1. Enter the Exception settings interface:
Configuration > Event > Basic Event > Exception
2. Check the checkbox to set the actions taken for the Exception alarm. Refer to Section
5.2.1 Configuring Motion Detection.
Figure 5-19 Exception Settings
3. Click
to save the settings.
5.3 Smart Event Configuration
The functions vary depending on the models of speed dome.
© Hikvision
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
Advertisement
Table of Contents
