Table of Contents
Advertisement
User Manual of Thermal Network Speed dome
121
Purpose:
When the speed dome is taken to another time zone, you can use the Time Zone function
to adjust the time. The time will be adjusted according to the original time and the time
difference between the two time zones.
From the Time Zone dropdown menu as shown in Figure 7-62, select the Time Zone in
which the speed dome locates.
Figure 7-62 Time Zone Settings
Configuring DST (Daylight Saving Time)
Purpose:
If there is the habit of adjusting clocks forward in your country in certain time period of a
year, you can turn this function on. The time will be adjusted automatically when the
Daylight Saving Time (DST) comes.
Steps:
1. Enter the DST interface by Configuration > Advanced Configuration > System > DST
Figure 7-63 DST Settings
2. Check
to enable the DST function.
3. Set the date of the DST period.
4. Click
to save the settings.
Configuring RS-485
Purpose:
The RS-485 serial port is used to control the PTZ of the camera. The configuring of the
PTZ parameters should be done before you control the PTZ unit.
Steps:
1.
Enter RS-485 Port Setting interface:
Configuration> Advanced Configuration> System > RS-485
© Hikvision
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
Advertisement
Table of Contents
