Table of Contents
Advertisement
User Manual of Thermal Network Speed dome
Proper configuration of all passwords and other security settings is the
responsibility of the installer and/or end-user.
Setting the directory in FTP server for saving files:
In the Directory Structure field, you can select the root directory, parent directory
and child directory.
Root directory: The files will be saved in the root of FTP server.
Parent directory: The files will be saved in a folder in FTP server. The name of
folder can be defined as shown in following Figure 7-12.
Child directory: It is a sub-folder which can be created in the parent directory.
The files will be saved in a sub-folder in FTP server. The name of folder can be
defined as shown in following Figure 7-13.
Upload type: To enable uploading the captured picture to the FTP server.
3. Click
4. You can click Test to confirm the configuration.
If you want to upload the captured pictures to FTP server, you also have to enable the
continuous snapshot or event-triggered snapshot in Snapshot interface.
Configuring Email Settings
Purpose:
The system can be configured to send an Email notification to all designated receivers if
an alarm event is detected, e.g., motion detection event, video loss, video-tampering, etc.
Before you start:
Please configure the DNS Server settings under Configuration> Network > Basic
Settings > TCP/IP before using the Email function.
Steps:
1. Enter the Email settings interface:
Configuration> Network > Advanced Settings > Email
© Hikvision
www.a1securitycameras.com email: sales@a1securitycameras.com
Figure 7-12 Parent Directory
Figure 7-13 Child Directory
to save the settings.
Available from A1 Security Cameras
84
Advertisement
Table of Contents
