Table of Contents
Advertisement
User Manual of Thermal Network Speed dome
3. Click
to enable recording the panning, tilting and zooming actions.
4. Use the PTZ control buttons to move the lens to the desired position after the
information of PROGRAM PATTERN REMAINNING MEMORY(%) is displayed on the
screen.
Pan the speed dome to the right or left.
Tilt the speed dome up or down.
Zoom in or out.
Refocus the lens.
5. Click
to save all the pattern settings.
Buttons on the Patterns interface:
Buttons
These 4 patterns can be operated separately and with no priority level.
When configuring and calling the pattern, proportional pan is valid; the limit stops and
auto flip will be invalid; and the 3D positioning operation is not supported.
4.5 Playback
Purpose:
This section explains how to view the video files stored in the network disks or memory
cards.
© Hikvision
www.a1securitycameras.com email: sales@a1securitycameras.com
Figure 4-12 Patterns Settings Interface
Description
Start the selected patrol/pattern.
Stop current patrol/pattern.
Set the selected preset/patrol.
Delete the selected preset/patrol/pattern.
Start recording a pattern.
Stop recording the pattern.
Available from A1 Security Cameras
30
Advertisement
Table of Contents
