Table of Contents
Advertisement
User Manual of Thermal Network Speed dome
4. Click
arming schedule configuration is the same as the setting of the arming schedule for
motion detection. Refer to Section 5.2.1 Configuring Motion Detection.
5.
Click
Notify Surveillance Center, Send Email, Upload to FTP/Memory Card/NAS, Trigger
Alarm Output and Trigger Recording. Refer to Section 5.2.1 Configuring Motion
Detection.
6. You can also choose the PTZ linking for the alarm input. Check the relative checkbox
and select the No. to enable Preset Calling, Patrol Calling or Pattern Calling.
7. You can copy your settings to other alarm inputs.
8. Click
© Hikvision
www.a1securitycameras.com email: sales@a1securitycameras.com
Figure 5-16 Alarm Input Settings
tab to enter the arming schedule setting interface. The
tab to select the linkage method taken for alarm input, including
to save the settings.
Figure 5-17 Linkage Method
Available from A1 Security Cameras
48
Advertisement
Table of Contents
