Preferences; Quick Settings Table - Agilent Technologies FieldFox N9913A User Manual

How to set Full Screen Mode
 Press System.
 Then
To Exit full screen Mode, press any key.

Preferences

FieldFox preferences are settings that survive a shutdown. When your FieldFox
is turned OFF, then back ON, these settings remain. All preference settings can
be restored to their factory defaults. Learn how on page 177
There are two ways to make FieldFox preference settings:
 From softkey selections throughout the FieldFox menu structure. Do this to
 From the Quick Settings table.

Quick Settings Table

All preferences can be set from the Quick Settings table. They are immediately
saved as Preferences when
How to view and change Preference Quick Settings
 Press System 7
 Then
 Then
 Press
 To change a setting:
 When finished changing ALL preferences, press Done. All changes are
 To exit the editing session without saving changes, press Esc at any time.
Learn more about these preference settings:
176
Full Screen.
temporarily try a setting, then press Save Current Settings (as preferences).
Learn how in the next section.
Preferences
Preferences
Next Page Previous Page
and
Use the ▲|▼ arrows to highlight a setting.
o
Then press Edit. The current setting changes to
o
Some settings require you to press a softkey to change the value. Otherwise,
o
use the numeric keypad, ▲|▼ arrows, or rotary knob to change the value.
When finished changing a value, press
o
immediately saved as Preferences.
Setting
Language
Display Settings
Audio
Done
is pressed.
to view all settings.
Done Edit
Learn more...
on page 177
on page 174
on page 173
yellow.
FieldFox User's Guide