7) Likewise, remove the two C-rings [10] and
the two bearings [11] at the rear.
8) Remove the three screws [12], and remove
the delivery guide [13].
COPYRIGHT © 1998 CANON INC. FINISHER-C1/SADDLE FINISHER-C2 REV. 0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 MECHANICAL CONSTRUCTION
[1 0]
Figure 4-107B
Figure 4-108B
[ 11 ]
[1 3]
[1 2 ]
4-19