Canon FINISHER-C1 Service Manual page 162

CHAPTER 4 MECHANICAL CONSTRUCTION
5. Removing the Stitcher Mount Unit
1) Remove the front inside cover.
2) Remove the E-ring [1], and remove the roll
[2] and the shaft [3].
3) Pull out the stitcher mount unit [4] to the
front.
4-32 COPYRIGHT © 1998 CANON INC. FINISHER-C1/SADDLE FINISHER-C2 REV. 0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
[ 2] [ 1]
Figure 4-132B
[4 ]
Figure 4-133B
[ 3]