Alarm - Canon FINISHER-C1 Service Manual

C.

Alarm

1. Finisher Unit Alarm
Code Error
08H No stapler
· The stapler is not
installed.
0AH No stapler
· The cartridge has run
out of staples.
2. Saddle Stitcher Unit alarm
a. Stacking Error Alarm
Code Error
02H Stacking
· The stack of sheets
capacity
on the delivery tray
error
is in excess of the
tray capacity.
02H Stitching
· The number of sheets
capacity
in the holding area
error
has exceeded 15.
COPYRIGHT © 1998 CANON INC.
Condition
· At all times
· At all times
Condition
· Upon delivery of the
stack that causes the
error.
· Upon delivery of the
sheet that causes the
error.
FINISHER-C1/SADDLE FINISHER-C2 REV. 0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 6 TROUBLESHOOTING
Detection Machine operation
· Prohibits stapler motor
(M6y) and stapler
shift motor (M4)
operation.
· Continues normal
operation; however,
the copier may
prohibit operation.
Detection Machine operation
· Continues normal
operation.
· Prohibits stitching.
Resetting
· Install the stapler.
· Replace the staple
cartridge, or set it
correctly.
Resetting
· Remove the stack
from the tray.
· Remove the sheets
from the holding
area.
6-41