Canon FINISHER-C1 Service Manual page 161

4.1.2 Using Adhesive
1) Attach adhesive tape to the border between
the paper retaining plate and its fixing plate;
then, fold it at a right angle. (Be sure the
edge of the folded tape A sticks out the bend
of the paper retaining plate as in Figure 4-
130.)
2) Perform the work form step 2) to step 5)
under 4. "Adjusting the Position of the Pa-
per Retaining Plate." (At this time, keep the
end of the tape A is outside the copier.)
3) Pull the end of the tape A out of the copier.
Be sure not to leave the tape inside the
copier.
4) Mount the eternal covers.
4.1.3 Using Adhesive
Glue the paper retaining plate and its fixing
plate together. Then, perform the work staritng
with step 2) under 4. "Adjusting the Position of
the Paper Retaining Plate."
COPYRIGHT © 1998 CANON INC. FINISHER-C1/SADDLE FINISHER-C2 REV. 0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 MECHANICAL CONSTRUCTION
[1]
Figure 4-130B
Figure 4-131B
[1]
A
A
[1]
4-31