Pcbs - Canon FINISHER-C1 Service Manual

III. PCBs
1. Removing the Finisher Controller
PCB
1) Remove the rear cover.
2) Disconnect the 13 connectors [1].
3) Remove the four screws [2], and remove
the finisher controller PCB [3].
COPYRIGHT © 1998 CANON INC. FINISHER-C1/SADDLE FINISHER-C2 REV. 0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 MECHANICAL CONSTRUCTION
[ 3 ]
Figure 4-301A
[ 2 ]
[ 1 ]
[ 2 ]
4-15