Canon FINISHER-C1 Service Manual page 143

4. Removing the Stapler
1) Open the front cover, and move the stapler
assembly to the front.
2) Remove the screw [1], and slide out the sta-
pler assembly [2].
3) Disconnect the connector [4] of the stapler
assembly [3].
COPYRIGHT © 1998 CANON INC. FINISHER-C1/SADDLE FINISHER-C2 REV. 0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 MECHANICAL CONSTRUCTION
Figure 4-214A
[4]
Figure 4-215A
[2]
[1]
[3]
4-13