Specifications - Canon FINISHER-C1 Service Manual

CHAPTER 1 GENERAL DESCRIPTION
II. SPECIFICATIONS
A.

Specifications

1. Finisher Unit
Item
Stacking method
Stacking orientation
Stacking size
Paper weight
Bins
Modes
Stacking capacity
Size mixing
Stacking mixing
Notes:
1. Approximate when computed with reference to 80 g/m
2. Alignment may not be correct if 750 or more small-size sheets are stacked on tray 2.
3. The accuracy of the stack height is ±7 mm.
COPYRIGHT © 1998 CANON INC.
1-2
Trays 1 through 3: by lifting tray
Interrupt tray: by fixed tray
Face-down
Face-up (1 to n copies only)
AB: A3, A4, A4R, A5, A5R, B4, B5, B5R, postcard
Inch: 279 × 432 mm (11 × 17), LGL, LTR, LTRR, STMT, STMTR
2
50 to 128 g/m
Interrupt tray, trays 1 through 3
Non-sort: trays 1 through 3 and interrupt tray
Sort: trays 1 through 3
Staple: trays 1 through 2
Interrupt tray Small size: 50 sheets
Large size: 30 sheets
Non staple sort Small-size
(Note 1)
Large-size
(Note 1)
Staple sort Small-size
(Note 1)
Large-size
(Note 1)
Size mixing: 44 mm or less (300 sheets)
Stapling: 22 mm or less (150 sheets)
Face-up/face-down
2
paper.
Table 1-201
FINISHER-C1/SADDLE FINISHER-C2 REV. 0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
Description
Tray 1: 44 mm high (300 sheets)
Tray 2: 146.6 mm high (1000 sheets)
Tray 3: 30 mm high (200 sheets)
Tray 1: 22 mm high (100 sheets)
Tray 2: 74 mm high (500 sheets)
Tray 3: 15 mm high (100 sheets)
Tray 1: 47 mm high/50 sets (300 sheets)
Tray 2: 146.6 mm high/50 sets (1000 sheets)
Tray 3: Not possible
Tray 1: 22 mm high/30 sets (150 sheets)
Tray 2: 74 mm high/30 sets (500 sheets)
Tray 3: Not possible
(Note 2)