Canon FINISHER-C1 Service Manual page 97

1. Receiving Sheets
The stitcher unit receives sheets from the finisher unit and deposits them inside the vertical path
in vertical orientation.
The vertical path while sheets are being deposited is configured by two paper deflecting plates.
The position of the sheets being deposited is set by the paper positioning plate so that the center
of the stack matches the stapling/folding position.
Sheets coming later are deposited closer to the delivery slot, and the volume of paper that may
be deposited is as follows:
15 sheets (maximum of 14 sheets of 80 g/m
COPYRIGHT © 1998 CANON INC.
CHAPTER 3 SADDLE STITCHER UNIT BASIC OPERATION
Direction of delivery
2nd sheet
Figure 3-202
FINISHER-C1/SADDLE FINISHER-C2 REV. 0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
2
+ 1 sheet of 128 g/m
1st sheet
Paper positioning plate
2
)
3-9