Canon FINISHER-C1 Service Manual page 75

5) When the second sheet arrives and its leading edge reaches the buffer inlet sensor (PI7), the
buffer roller starts to operate once again. At the same time, the buffer outlet solenoid (SL3)
turns off so that the path is directed in the direction of delivery. (The actual switch-over will
occur after the trailing edge of the first sheet has moved past the flapper.)
6) The first sheet and the second sheet simultaneously move past above the buffer roller at the
same time.
COPYRIGHT © 1998 CANON INC. FINISHER-C1/SADDLE FINISHER-C2 REV. 0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 2 FINISHER UNIT BASIC OPERATION
OFF
SL3
Figure 2-261
1st sheet
2nd sheet
Figure 2-262
Buffer inlet paper
sensor (PI7)
Buffer inlet paper
sensor (PI7)
2-45