Canon FINISHER-C1 Service Manual page 135

3) Remove the slide guide [4] and two upper
support covers [3].
4) Lift the tray assembly [5] to remove.
Caution:
When installing the removed tray assembly
back to the finisher assembly, be sure to
release the tray lift motor gear clutch [1] with
a screwdriver or the like when inserting it.
Take extra care. (Figure 4-110A)
COPYRIGHT © 1998 CANON INC. FINISHER-C1/SADDLE FINISHER-C2 REV. 0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 MECHANICAL CONSTRUCTION
[3]
[5]
Figure 4-109A
Figure 4-110A
[3]
[4]
4-5