Canon FINISHER-C1 Service Manual page 3

This Service Manual contains basic data and figures for the Finisher-C1/Saddle Fin-
isher-C2 needed to service the machine in the field.
Chapter 1 'General Description' introduces the finisher's features, specifications, and
names of parts, and shows how to operate the sorter.
Chapter 2 'Finisher Unit Basic Operation' discusses the principles of operation used for
the finisher mechanical and electrical systems. It also explains the timing at
which these systems are operated.
Chapter 3 'Saddle Stitcher Unit Basic Operation' discusses the principles of operation
used for the saddle stitcher unit's mechanical and electrical systems. It also
explains the timing at which these systems are operated.
Chapter 4 'Mechanical System' discusses how the finisher is constructed mechanically,
and shows how it may be disassembled/assembled and adjusted.
Chapter 5 'Maintenance and Inspection' provides tables of periodically replaced parts
and consumables and durables, together with a scheduled servicing chart.
Chapter 6 'Troubleshooting' provides tables of maintenance/inspection, standards/ad-
justments, and problem identification (image fault/malfunction).
'Appendix' contains diagrams showing tables of signals, tables of solvents/
oils, and a general timing chart.
The descriptions in this Service Manual are subject to change without notice for prod-
uct improvement or other purposes, and major changes will be communicated in the form
of Service Information bulletins.
All service persons are expected to have a good understanding of the contents of this
Service Manual and all relevant Service Information bulletins and be able to identify and
isolate faults in the machine.
COPYRIGHT © 1998 CANON INC.
INTRODUCTION
FINISHER-C1/SADDLE FINISHER-C2 REV. 0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
i