(B) Saddle Stitcher Unit - Canon FINISHER-C1 Service Manual

CHAPTER 4 MECHANICAL CONSTRUCTION

(B) SADDLE STITCHER UNIT

1. Removing the Folding Roller
1) Remove the saddle stitcher unit.
(See 2. "Removing and Installing the Saddle
Unit.")
2) Disconnect the three connectors [1] (paper
inlet side).
3) Disconnect two connectors [2], remove the
three screws [3], and remove the MOTOR
mount [4].
Caution:
Take care not to drop the bushings.
4-16 COPYRIGHT © 1998 CANON INC. FINISHER-C1/SADDLE FINISHER-C2 REV. 0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
[1]
Figure 4-101B
[ 4 ]
[ 2 ] [ 3 ]
Figure 4-102B
[ 2 ]