Basic Operation - Canon FINISHER-C1 Service Manual

SADDLE STITCHER UNIT

BASIC OPERATION

I. BASIC OPERATION ...................3-1
A. Outline ..................................3-1
B. Electrical Circuitry ................3-2
C. Inputs to and Outputs
from the Saddle Stitcher
Controller PCB .....................3-3
II. FEEDING/DRIVE SYSTEM .......3-8
A. Outline ..................................3-8
III. PAPER DEPOSITING
MECHANISM .......................... 3-14
A. Outline ............................... 3-14
B. Controlling the Inlet
Flappers ............................ 3-17
COPYRIGHT © 1998 CANON INC. FINISHER-C1/SADDLE FINISHER-C2 REV. 0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 3
C. Controlling the Movement
of Sheets ........................... 3-21
D. Aligning the Sheets ........... 3-22
E. Controlling the Phase of
the Crescent Roller ........... 3-25
IV. STITCHING SYSTEM ............. 3-27
V. FOLDING/DELIVERY
SYSTEM .................................. 3-30
VI. CHECKING FOR A JAM ......... 3-35
VII. POWER SUPPLY .................... 3-39