Canon FINISHER-C1 Service Manual page 131

(A) FINISHER UNIT
I. EXTERNALS AND CONTROLS
A. External Covers
1. Removing the Front Door Assembly
1) Remove the door assembly [1].
2) Remove the screw [2], and remove the
bushing [3]; then, remove the front door
assembly.
COPYRIGHT © 1998 CANON INC. FINISHER-C1/SADDLE FINISHER-C2 REV. 0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 MECHANICAL CONSTRUCTION
[2]
[1]
[5]
[1] Tray
[2] Interrupt tray
[3] Rear cover (3)
[4] Rear lower cover (4) (Saddle Finisher-C2)
[5] PCB cover (4)
[6] Front lower cover (Finisher-C1)
[7] Front door (Saddle Finisher-C2)
[8] Front door
[9] Upper door assembly
Figure 4-101A
[1]
Figure 4-102A
[6]
[3]
[4]
[3]
[2]
4-1