Canon FINISHER-C1 Service Manual page 210

Table of Contents

Advertisement

CHAPTER 6 TROUBLESHOOTING
Error code Detail code
E535
01
02
03
E540
01
02
03
E584
01
02
03
6-38
COPYRIGHT © 1998 CANON INC.
Error type
· Delivery motor (M2)
· The swing guide closed detecting switch does not turn on
· Swing guide closed
detecting switch 2
(MS6)
· Delivery motor (M2)
· The swing guide open sensor does not turn on even after the
· Swing guide open
sensor (PI18)
· Safety range switch
· The swing guide closed detecting switch is off when the tray
(MS3)
· Swing guide closed
detecting switch
(MS6)
· Tray lift motor (M5)
· The movement does not end within 15 sec after the tray lift
· Tray lift motor clock
sensor 1/2
· The tray home position cannot be detected after the tray lift
(PI12/PI9)
· Tray home position
sensor (PI8)
· Tray upper limit
· The tray upper limit detecting switch is on while the tray is
detecting switch
(MS4)
· Tray lift motor (M5)
· Clock pulses from the clock sensor 1/2 are not obtained for
· Tray lift motor clock
sensor 1/2
(PI19/PI9)
· Feeder motor (M1)
· The shutter closed detecting switch does not turn on after the
· Shutter closed
detecting switch
(MS4)
· Feed motor (M1)
· The shutter open sensor does not turn on even after the feed
· Shutter open sensor
(PI5)
· Safety range
· The shutter closed detecting switch is off when the tray 1/2 is
detecting switch
(MS3)
· Shutter open
detecting switch
(MS4)
FINISHER-C1/SADDLE FINISHER-C2 REV. 0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
Description
even after the delivery motor has rotated in reverse for 1 sec.
delivery motor has rotated in reverse in 1 sec.
1/2 is at safety range switch off position.
motor is driven.
motor has been driven for 15 sec.
moving up.
200 ms after the tray lift motor has been driven.
feed motor has rotated in reverse for 1 sec or more.
motor has been rotated in reverse for 1 sec.
at safety range switch off position.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Saddle finisher-c2

Table of Contents