Canon FINISHER-C1 Service Manual page 29

FINISHER UNIT BASIC OPERATION
I. BASIC OPERATION ...................2-1
A. Outline ..................................2-1
B. Outline of Electrical
Circuitry ................................2-2
C. Inputs to and Outputs
from the Finisher
Controller PCB .....................2-3
II. FEED/DRIVE SYSTEM ..............2-9
A. Outline ..................................2-9
B. Types of Delivery Paths ..... 2-13
C. Feeding and Delivering ..... 2-16
COPYRIGHT © 1998 CANON INC. FINISHER-C1/SADDLE FINISHER-C2 REV. 0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 2
D. Job Offset .......................... 2-19
E. Stapling Operation ............ 2-22
F. Stapler Unit........................ 2-28
G. Tray Operation ................... 2-35
H. Detecting the Height of the
Stack on the Tray ............... 2-37
I. Shutter Operation .............. 2-39
J. Buffer Path Operation ........ 2-43
K. Interrupt Tray Delivery ........ 2-47
L. Detecting Jams .................. 2-49
III. POWER SUPPLY SYSTEM .... 2-55