K. Interrupt Tray Delivery
1.
Outline
When delivery to the interrupt tray is selected on the copier, the finisher delivers sheets to the
interrupt tray as follows:
1) When the first sheet arrives, the buffer inlet flapper solenoid (SL2) and the interrupt tray sole-
noid (SL4) turn on to switch to the feeding route for interrupt tray delivery. The switch-over
occurs as soon as the sheet of the previous job has moved past the buffer inlet flapper or the
sheet for interrupt delivery has reached the copier pre-registration sensor.
2) The first sheet enters the interrupt tray delivery route and then is delivered.
COPYRIGHT © 1998 CANON INC. FINISHER-C1/SADDLE FINISHER-C2 REV. 0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 2 FINISHER UNIT BASIC OPERATION
Figure 2-265
Figure 2-266
2-47