Canon FINISHER-C1 Service Manual page 100

CHAPTER 3 SADDLE STITCHER UNIT BASIC OPERATION
4. Feeding the Stack
The unit folds the stitched stack of sheets and then feeds it to the point of delivery, which is
where the center of the stack, i.e., stapling position, matches the height of the paper pushing plate
and the folding roller nip.
The stack is moved forward by operating the paper positioning plate. When the plate is oper-
ated, the guide plate which has been covering the folding rollers, also moves down so that the
folding rollers directly face the stack.
Guide plate
3-12 COPYRIGHT © 1998 CANON INC.
Folding roller
Figure 3-205
FINISHER-C1/SADDLE FINISHER-C2 REV. 0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
Paper pushing plate
Paper positioning plate