Outline; Basic Operation - Canon FINISHER-C1 Service Manual

CHAPTER 3 SADDLE STITCHER UNIT BASIC OPERATION
I. BASIC OPERATION
A.

Outline

The unit "stitches" (2 points) a stack of sheets delivered by the finisher unit and folds it in two
for delivery. All these operations are controlled by the saddle stitcher controller PCB in response to
commands from the copier through the finisher unit.
Finisher unit control system
Guide plate drive system
Paper positioning plate
drive system
Alignment drive system
Stitcher drive system
Delivery drive system
Feed drive system
Paper pushing plate
drive system
Folding roller drive system
Figure 3-101
COPYRIGHT © 1998 CANON INC. FINISHER-C1/SADDLE FINISHER-C2 REV. 0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON) 3-1