Canon FINISHER-C1 Service Manual page 134

CHAPTER 4 MECHANICAL CONSTRUCTION
2) While releasing the claws of the upper sup-
port cover [2] (front, rear) with a screw-
driver, lift it to remove.
6. Removing the Tray Assembly
1) Remove the rear cover. For the Saddle Fin-
isher-C2, remove the rear lower cover also.
2) Disconnect the J201 [1] and grounding wire
[2].
4-4
Figure 4-107A
COPYRIGHT © 1998 CANON INC. FINISHER-C1/SADDLE FINISHER-C2 REV. 0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
[2]
Figure 4-108A
[2]
[1]