Canon FINISHER-C1 Service Manual page 132

CHAPTER 4 MECHANICAL CONSTRUCTION
2. Removing the Rear Cover
1) Open the upper door assembly [1].
2) Remove the three screws [2], and lift the
rear cover [3] to remove.
3. Removing the Upper Door
Assembly
1) Open the upper door assembly [1].
2) Remove the two claws [2], and remove the
upper door assembly.
4-2
COPYRIGHT © 1998 CANON INC. FINISHER-C1/SADDLE FINISHER-C2 REV. 0 DEC. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
[3]
Figure 4-103A
[2]
Figure 4-104A
[1]
[2]
[1]