3Com VCX V7000 Installation Manual page 417

b Enter these commands:
cd /opt/3com/VCX/vcxdata/bin
./checkReplication
c Enter the site ID of the remote regional office or the branch office.
If replication has been completed, you see this message:
INFO: Multi-Master Replication STATUS:
**************************************
*************** NORMAL ***************
**************************************
If you see a different status message, database replication has not yet
been completed.
9 On the Call Processing Server that is located in the regional office that is
associated with this branch office, start the Tomcat process.
a Log in as root.
b Enter these commands:
service vcxtomcat start
10 Ensure that the codec that is installed on the running server is installed on
the down server.
a On the running server, log in as root.
b Enter these commands.
cd /opt/3com/VCX/UMS/app/app.dir
grep Codec config.app
The output from this command indicates which codec is being used
on the running server.
Example:
Codec_Supported=g711u
c On down server, install the same codec.
cd /usr/app/app.dir
./change_codec g711u
11 Ensure that the appropriate language packages are installed on the down
server.
a On another branch office server, log in as root.
Replacing a Disk (Branch Office) 417