3Com VCX V7000 Installation Manual page 416

416 A B: R
PPENDIX EPLACING A
F D VCX S
AILED ISK ON A
To complete the VCX switchversion operation please restore
the IP Messaging and Oracle databases. After these have
been restored you may reboot the system.
e Compare the version of the currently active operating system to the
version in the inactive partition, using this command:
vcx-os-query
In the output from this command, the second column contains the
operating system version for the two partitions (A and B) and the last
column indicates which partition is currently active.
Example Output From the vcx-os-query Command
OS Version
A 5.4.1
B 5.9.1
In the example, the active operating system version is 5.4.1 and the
version in the inactive partition is 5.9.1.
f Switch to the more recent version of the operating system using this
command:
vcx-os-switch 5.9.1
6 Reboot the down server using this command:
reboot
7 After the reboot process has been completed, configure VCX services on
the down server using this command:
vcx-setup
The script detects that you have already configured the networking
parameters for the server and prompts you to configure VCX services.
8 On Authentication and Directory server in the regional office that is
associated with this branch office, check replication for the database for
this branch office and verify that the status is normal. Use these
commands:
a Log in as cworks.
ERVER
Partition
/dev/sda2
/dev/sda3
Label
/
/B
Status
active