3Com VCX V7000 Installation Manual page 315

Ip telephony solution system release 9.0
Hide thumbs Also See for VCX V7000:
Table of Contents

Advertisement

Sample Services Configuration Script — Secondary Authentication and Directory Server
(continued)
The Trap Community String provides a community string to be used when
sending SNMP traps to the trap destination.
In some cases it may be desirable for SNMP Traps to be sent to multiple
destinations.
Additional Trap Destinations can be entered here.
input to indicate that all destinations have been entered.
IP Address of the first additional trap destination for this system.
Trap Destination
The Write Community String specifies the community string to be used by a
management station when sending write requests to this system.
Write Community String
The Read Community String specifies the community string to be used by a
management station when sending read requests to this system.
Read Community String
Common Agent supports a management station authentication feature.
Answering 'Y' here will allow only a set of pre-identified SNMP management
stations to manage the system. (You will be able to enter IP addresses of
authorized management stations next.
also be configured using EMS or another management station at a later
point.)
Enable management station authentication? [N]
Common Agent supports the SNMP V3 protocol.
management station to use the secure SNMP V3 protocol to manage this VCX system.
(You will be able to configure passwords for pre-configured user names next. These
authentication and privacy passwords should be used from EMS or other management
CAUTION: Press the Enter or Return key to accept the default answer
(private). 3Com strongly recommends that users change this string for
security reasons.
CAUTION: Press the Enter or Return key to accept the default answer
(public). 3Com strongly recommends that users change this string for
security reasons.
Authorized management stations can
Press the Enter or Return key to accept the default answer (N). To enable
management station authentication, enter Y. The script will then accept
the IP addresses of up to four network management stations.
:
: private
: public
:
Answering 'Y' here will allow an SNMP
315
Enter a blank

Advertisement

Table of Contents
loading

Table of Contents