Installing Prompts (Secondary Ip Messaging Server) - 3Com VCX V7000 Installation Manual

320 C 8: I
HAPTER NSTALLING
Installing Prompts
(Secondary IP
Messaging Server)
L P
ANGUAGE ROMPTS
2 Enter these commands:
cd /opt/3com/VCX/UMS/app/app.dir
./add_language
3 Answer the questions to install the prompts that you want.
4 Stop and restart IPMSG by entering these commands:
cd /opt/3com/VCX/UMS/vcx-scripts/init.d
./S60ums stop
./S60ums start
To assign a set of language prompts to any IPMSG mailbox, use your
browser to log in to the VCX Administrator Interface and follow the
instructions in the VCX Administration Guide.
The Secondary IP Messaging Server may be any of these:
A regional office server that runs IP Messaging services only
■
A regional office server that runs IP Messaging and IP Telephony
■
services
A server at a single site that runs IP Messaging services
■
A server at a single site that runs IP Messaging and IP Telephony
■
services
A branch office server that runs IP Messaging and IP Telephony
■
services
1 Log in as root on the Secondary IP Messaging Server. The default
password is pvadmin.
CAUTION: 3Com strongly recommends that customers change this
password on all VCX servers. Guidelines about other passwords and other
security-related issues can be found in the "VCX Security Guide."
2 Enter these commands:
cd /opt/3com/VCX/UMS/app/app.dir
./add_language
3 Answer the questions to install the prompts that you want.
4 Stop and restart IPMSG by entering these commands:
cd /opt/3com/VCX/UMS/vcx-scripts/init.d
./S60ums stop
./S60ums start