3Com VCX V7000 Installation Manual page 391

If replication has been completed, you see this message:
INFO: Multi-Master Replication STATUS:
**************************************
*************** NORMAL ***************
**************************************
If you see a different status message, database replication has not yet
been completed.
6 Restart VCX services on the primary server.
a Log in as root. The default password for the root account is pvadmin.
CAUTION: 3Com strongly recommends that customers change this
password on all VCX servers. Guidelines about other passwords and other
security-related issues can be found in the "VCX Security Guide."
b Enter these commands:
cd /etc/init.d
./vcx start
7 Restart all VCX services on the secondary server.
a Log in as root. The default password for the root account is pvadmin.
CAUTION: 3Com strongly recommends that customers change this
password on all VCX servers. Guidelines about other passwords and other
security-related issues can be found in the "VCX Security Guide."
b Enter these commands:
cd /etc/init.d
./vcx start
This marks the end of the outage.
Restoring an IP Messaging Server to Service
Follow the instructions in this section to replace a disk on a Primary or
Secondary IP Messaging Server. For a Primary or Secondary IP Telephony
Server, see Restoring an IP Telephony Server to Service
section.
1 Stop all VCX processes on the down server.
a On the down server, log in as root. The default password for the root
account is pvadmin.
Replacing a Disk (Single Site)
earlier in this
391