3Com VCX V7000 Installation Manual page 132

132 C 3: I
HAPTER NSTALLING AN
Sample Services Configuration Script — Primary IP Telephony Server (continued)
----------------------------------------------------------------------------
------------- Welcome to the VCX Service Configuration Wizard --------------
----------------------------------------------------------------------------
This wizard sets up VCX services.
Do you wish to configure services at this time? [Y]
------------------------- Configuring VCX Services -------------------------
This server runs IP Telephony services.
separate server.
Please enter the role of this system:
1 - This is a regional office, primary IP Telephony server OR a standalone
IP Telephony server.
2 - This is a regional office, secondary IP Telephony server.
3 - This is a branch office IP Telephony server.
Enter your choice by number [1] : 1
Services running on this system need to communicate with other systems and
devices in order to operate.
asked for information about these , and for
other global parameters.
The site ID is a unique value which identifies a particular site in a
multi-site VCX installation.
consisting of letters and/or numbers.
or tabs may be used. Note: the site ID cannot be changed after initial setup is
complete, so choose the value carefully.
Enter a unique identifier for this site
The site name provides a user-friendly description of a location in a
multi-site VCX installation.
certain management interfaces.The site name may be up to 255 characters
long and can contain letters, numbers, spaces, underscores, dashes, and
colons.
IP T S
ELEPHONY ERVER
Press the Enter or Return key to accept the suggested answer (Y).
Enter 1 to configure this server as the Primary IP Telephony server.
In the next series of questions, you will be
It is a string of up to 11 characters,
No punctuation characters, spaces,
Enter a site ID of your choice.
This may be used to identify a site in
:
IP Messaging is provided on a
: