3Com VCX V7000 Installation Manual page 222

222 C 4: I
HAPTER NSTALLING AN
Sample Services Configuration Script — Branch Office IP Messaging Server (continued)
The site ID is a unique value which identifies a particular site in a
multi-site VCX installation.
consisting of letters and/or numbers.
or tabs may be used. Note: the site ID cannot be changed after initial setup is
complete, so choose the value carefully.
Enter a unique identifier for this site
The Customer Name identifies the company using this VCX system.
Enter the customer name
Some VCX applications can use European date ordering.
enable this.
Use European date order? (Y/N) [N]
The primary Call Processor has principal responsibility for handling calls.
IP address of the primary Call Processor
The secondary Call Processor acts as a backup if the primary is down or
unreachable. If there is no secondary Call Processor in your installation, leave
this entry blank.
IP address of the secondary Call Processor
IP M S
ESSAGING ERVER
It is a string of up to 11 characters,
No punctuation characters, spaces,
Enter an identifier for the branch office in which this server will reside.
Enter the name of your company.
Press the Enter or Return key to accept the default answer (N). To use the
European date order, enter Y.
Call Processor tasks are associated with the eth1 network interface. Enter
the IP address of eth1 on the Primary Call Processing Server in your VCX
system.
Call Processor tasks are associated with the eth1 network interface. Enter
the IP address of eth1 on the Secondary Call Processing Server in your
VCX system.
:
:
Answer 'Y' here to
:
:
: