3Com VCX V7000 Installation Manual page 185

Sample Network Configuration Script — Primary IP Messaging Server (continued)
-------------------------- Configuring Hostname ---------------------------
Enter system hostname
--------------------- Configuring IP Interface 'eth0' ---------------------
IP Address
Network Subnet Mask
Default Gateway Address
--------------------- Configuring IP Interface 'eth1' ---------------------
Interface State
IP Address
Network Subnet Mask
Default Gateway Address
------------------------- Configuring DNS Servers -------------------------
Enter DNS servers one at a time.
When done, enter 0.0.0.0 to stop.
Primary DNS Server
Secondary DNS Server
Tertiary DNS Server
----------------------- Configuring DNS Search Path -----------------------
Press Enter to leave the current path unchanged, or specify
a new search path, with spaces separating each entry.
DNS Search Path :
:
Enter the unqualified name that you want to use for this primary server.
Unqualified host names must conform to the rules outlined in
Names in Chapter 4.
:
:
:
Enter the IP address for this server's eth0 interface and the subnet mask
and default gateway IP address appropriate for this site.
: enabled
Change the default value (disabled) to enabled.
:
:
:
Enter the IP address for this server's eth1 interface and the subnet mask
and default gateway address appropriate for this site.
:
:
:
Enter up to three DNS server IP addresses.
Enter the DNS search path appropriate for this site.
185
Host