3Com VCX V7000 Installation Manual page 282

282 C 6: I
HAPTER NSTALLING A
Sample Services Configuration Script — Secondary Call Processing Server (continued)
Trap Destination
In some cases it may be desirable for SNMP Traps to be sent to multiple
destinations. Additional Trap Destinations can be entered here.
input to indicate that all destinations have been entered.
IP Address of the first additional trap destination for this system.
Trap Destination
The Write Community String specifies the community string to be used by a
management station when sending write requests to this system.
Write Community String
The Read Community String specifies the community string to be used by a
management station when sending read requests to this system.
Read Community String
Common Agent supports a management station authentication feature.
Answering 'Y' here will allow only a set of pre-identified SNMP management
stations to manage the system. (You will be able to enter IP addresses of
authorized management stations next.
also be configured using EMS or another management station at a later
point.)
Enable management station authentication? [N]
C P S
ALL ROCESSING ERVER
Enter the IP address of the PC or other system on which you are running
your network management software (for example, EMS).
CAUTION: Press the Enter or Return key to accept the default answer
(private). 3Com strongly recommends that users change this string for
security reasons.
CAUTION: Press the Enter or Return key to accept the default answer
(public). 3Com strongly recommends that users change this string for
security reasons.
Authorized management stations can
Press the Enter or Return key to accept the default answer (N). To enable
management station authentication, enter Y. The script will then accept
the IP addresses of up to four network management stations.
:
Enter a blank
:
: private
: public
: