3Com VCX V7000 Installation Manual page 115

Sample Services Configuration Script — Branch Office Server (continued)
The secondary Authentication & Directory Service acts as a backup to the
primary Authentication & Directory Service and provides authentication,
authorization, and certain user-specific functions.If there is no secondary Auth &
Dir Service in your installation, leave this entry blank.
IP address of the secondary Auth & Dir Service
The primary Media Gateway acts as the interface between the VCX IP
Telephony system and the external telephone network.
IP address of the primary Media Gateway
The secondary Media Gateway is an additional interface between the VCX IP
Telephony system and the external telephone network.
secondary Media Gateway, leave this entry blank.
IP address of the secondary Media Gateway
Enter a password for the 'cworks' user.
account on this system, and provided to those applications which require it.
must enter a password; a blank value is not permitted.
Password for the 'cworks' user
Password for the 'cworks' user (confirm)
Enter the current password for the 'cworks' user on the regional data server.
is required by one or more applications in order to permit interaction with the
regional system.
enter the *current* regional password.
Password for the 'cworks' user at the region
Password for the 'cworks' user at the region (confirm)
Authentication and Directory Service tasks are associated with the eth0
network interface. Enter the IP address of eth0 on the Secondary
Authentication and Directory Server in your VCX system.
Enter the IP address of the analog or digital media gateway that this VCX
server will use as the primary way of connecting to the Public Switched
Telephone Network (PSTN). In most configurations, the primary media
gateway for a branch office is located on the same subnetwork as the
branch office server.
Enter the IP address of a secondary analog or digital media gateway if the
branch office has one.
Note: This will *not* change the password at the region; you must
The script prints a summary of the global parameters that you have
specified.
:
:
If there is no
:
This password will be set for the local
: ******
: ******
: ******
: ******
115
You
This